Tester le fichier MIB d'InterSystems avec une API Rest

Bonjour Cyril,

Je n'ai pas encore été au bout de l'exercice, ce pendant, je vais vous partager mon avancé sur ce sujet :

Avez-vous vérifié que le deamon snmpd etait bien installé et configuré sur votre instance docker ?

Par defaut, il n'est pas installé, il faut donc l'installer et le configurer.

Exemple d'un dockerfile pour installer snmpd :

ARG IMAGE=intersystemsdc/iris-community:latest
FROM $IMAGE 

WORKDIR /irisdev/app

USER root
RUN apt-get update && apt-get install -y \
	nano \
    snmpd \
    snmp \
	sudo && \
	/bin/echo -e ${ISC_PACKAGE_MGRUSER}\\tALL=\(ALL\)\\tNOPASSWD: ALL >> /etc/sudoers && \
	sudo -u ${ISC_PACKAGE_MGRUSER} sudo echo enabled passwordless sudo-ing for ${ISC_PACKAGE_MGRUSER}

COPY snmpd.conf /etc/snmp/snmpd.conf
USER ${ISC_PACKAGE_MGRUSER}

Exemple d'un snmpd.conf :

###############################################################################
#
# snmpd.conf:
#   An example configuration file for configuring the NET-SNMP agent with Cache.
#
#   This has been used successfully on Red Hat Enterprise Linux and running
#   the snmpd daemon in the foreground with the following command:
#
#   /usr/sbin/snmpd -f -L -x TCP:localhost:705 -c./snmpd.conf
#
#   You may want/need to change some of the information, especially the
#   IP address of the trap receiver of you expect to get traps. I've also seen
#   one case (on AIX) where we had to use  the "-C" option on the snmpd command
#   line, to make sure we were getting the correct snmpd.conf file. 
#
###############################################################################

###########################################################################
# SECTION: System Information Setup
#
#   This section defines some of the information reported in
#   the "system" mib group in the mibII tree.

# syslocation: The [typically physical] location of the system.
#   Note that setting this value here means that when trying to
#   perform an snmp SET operation to the sysLocation.0 variable will make
#   the agent return the "notWritable" error code.  IE, including
#   this token in the snmpd.conf file will disable write access to
#   the variable.
#   arguments:  location_string

syslocation  "System Location"

# syscontact: The contact information for the administrator
#   Note that setting this value here means that when trying to
#   perform an snmp SET operation to the sysContact.0 variable will make
#   the agent return the "notWritable" error code.  IE, including
#   this token in the snmpd.conf file will disable write access to
#   the variable.
#   arguments:  contact_string

syscontact  "Your Name"

# sysservices: The proper value for the sysServices object.
#   arguments:  sysservices_number

sysservices 76

###########################################################################
# SECTION: Agent Operating Mode
#
#   This section defines how the agent will operate when it
#   is running.

# master: Should the agent operate as a master agent or not.
#   Currently, the only supported master agent type for this token
#   is "agentx".
#   
#   arguments: (on|yes|agentx|all|off|no)

master agentx
agentXSocket tcp:localhost:705

###########################################################################
# SECTION: Trap Destinations
#
#   Here we define who the agent will send traps to.

# trapsink: A SNMPv1 trap receiver
#   arguments: host [community] [portnum]

trapsink  localhost public   

###############################################################################
# Access Control
###############################################################################

# As shipped, the snmpd demon will only respond to queries on the
# system mib group until this file is replaced or modified for
# security purposes.  Examples are shown below about how to increase the
# level of access.
#
# By far, the most common question I get about the agent is "why won't
# it work?", when really it should be "how do I configure the agent to
# allow me to access it?"
#
# By default, the agent responds to the "public" community for read
# only access, if run out of the box without any configuration file in 
# place.  The following examples show you other ways of configuring
# the agent so that you can change the community names, and give
# yourself write access to the mib tree as well.
#
# For more information, read the FAQ as well as the snmpd.conf(5)
# manual page.
#
####
# First, map the community name "public" into a "security name"

#       sec.name  source          community
com2sec notConfigUser  default       public

####
# Second, map the security name into a group name:

#       groupName      securityModel securityName
group   notConfigGroup v1           notConfigUser
group   notConfigGroup v2c           notConfigUser

####
# Third, create a view for us to let the group have rights to:

# Make at least  snmpwalk -v 1 localhost -c public system fast again.
#       name           incl/excl     subtree         mask(optional)
# access to 'internet' subtree
view    systemview    included   .1.3.6.1

# access to Cache MIBs Caché and Ensemble
view    systemview    included   .1.3.6.1.4.1.16563.1
view    systemview    included   .1.3.6.1.4.1.16563.2
####
# Finally, grant the group read-only access to the systemview view.

#       group          context sec.model sec.level prefix read   write  notif
access  notConfigGroup ""      any       noauth    exact  systemview none none

Ensuite, il faut lancer le deamon snmpd :

sudo service snmpd start

Sur iris, il faut ensuite configurer le snmp agent :

%SYS> w $$start^SNMP()

Avec toutes ces étapes, vous devriez pouvoir récupérer des informations via snmp.

snmpwalk -m ALL -v 2c -c public localhost .1.3.6.1.4.1.16563.1.1.1.1

C'est là ou je bloque pour le moment, je n'arrive pas à récupérer les informations d'IRIS.

Cependant, le service snmpd est bien lancé et fonctionnel ainsi que le snmp agent.

Pour plus d'informations, je vous invite à lire les articles suivants :

https://community.intersystems.com/post/intersystems-data-platforms-and-performance-part-5-monitoring-snmp